METAL WALL ART
Dimensional metal wall art sculpted by hand from copper, bronze, brass and other metals. Each piece is a one-of-a-kind design created using techniques that have been practiced by metalworkers for centuries. These handcrafted wall sculptures add a finished, curated look to home decor and interior design.
A blooming flower sits at the center of this metal wall sculpture, framed by overlapping architectural forms. The flower’s curves echo the geometry behind it, unifying natural and manmade elements in a fluid composition.
1 available
Abstract Metal Owl Wall Sculpture
$3,695.00
An abstract owl is perched among architectural and natural forms in this handcrafted metal wall sculpture. A blend of classical and modern styles give the piece a contemporary look with an old-world feel, and a design that remains open to interpretation.
1 available
Geologic Abstract Metal Wall Art with Green Patina
$2,495.00
The abstract geologic design of this metal wall sculpture is reminiscent of topographical landscapes, jagged coastlines or mineral formations. Hand hammered from copper sheet into a three-dimensional relief, the 1¼ inch thick sculpture has the appearance of a solid, elemental slab.
1 available
Melting Copper Wall Art Sculpture
$2,795.00
A clean, rectangular slab gives way to a heavy dripping edge in this hand formed metal wall art. The sculpture feels more like a paused event than a static object, as if the piece could continue to drip down the wall.
1 available
Metal Wall Art With Flowers & Architecture
$3,695.00
Organic, botanical forms merge with layered architectural shapes in this one-of-a-kind metal wall sculpture. Hand-formed from a single sheet of copper, the raised relief was pushed directly into the metal, leaving a surface patterned with the impressions of the forming process. This original design blends classical motifs with a contemporary composition, giving it a versatile style that matches a range of decor.
1 available
Three Panel Geometric Abstract Wall Sculpture
$3,495.00
This three-panel copper wall sculpture has a modern abstract design and is made from hand-shaped sheet metal. Measuring 1½ inches deep, these panels have three-dimensional surfaces of raised geometric planes and curved forms with a ¼-inch relief. The copper was treated with salts, acids and chemicals over several weeks to produce a colorful patina of browns, blacks, and blue-green tones.
1 available
Circular Geometric Abstract Metal Wall Art
$2,995.00
This modern, dimensional wall sculpture has overlapping natural forms in an abstract open-ended design that invites viewer interpretation. The raised relief was pushed into copper sheet metal by countless hammer blows, creating a dimensional surface of interlocking plant and animal motifs.
1 available
Copper Wall Art with Blue & Green Patina
$1,795.00
This abstract piece of copper wall art has a heavily weathered, colorful patina of browns, reds, greens and blues. These colors form on copper when it is exposed to salts, moisture and acids, and this natural process was intensified in the studio. This piece fits well in contemporary, modern settings or anywhere that could use a splash of color. Can be displayed vertically or horizontally.
1 available
Textured Metal Wall Art with Green & Brown Patina
$1,295.00
This metal wall art has a unique, heavily weathered surface created through an accelerated natural oxidation processes. The organic colors work beautifully in contemporary spaces and with natural materials like wood and stone. The piece can be displayed horizontally or vertically on a french cleat hanger.
1 available
FREQUENTLY ASKED QUESTIONS
Metal wall decor adds a natural material to a space and is extremely durable. Metal art can outlast its owner, with examples of copper and bronze work still intact after centuries underground. Copper and other metals have inherent material value, which makes them a high-end choice for fine art and home decor.
This artwork is made from solid metal and sheet metal, not faux finishes, metallic paint, printed metal or cast resin composites like cold cast bronze. Some pieces may include a wood backing or internal support for framing, structure or hanging, but the visible surface is real, handworked metal.
Each metal wall art piece ships ready to hang, with hardware mounted on the back and instructions included. Hanging systems vary by artwork and may use a cleat-style mount for a secure, level fit. Standard hardware for drywall and wood is included. Masonry anchors are available on request for brick, concrete or stone surfaces.
Metal wall art requires minimal maintenance. Each piece is sealed with lacquer or Renaissance Wax, so light dusting with a soft, non-abrasive cloth is usually sufficient. For waxed pieces, a thin recoat can be applied to refresh the surface if it needs cleaning.
Do not use cleaning products, chemicals, polishes, water or abrasive pads. These can scratch the surface, strip the wax or damage the patina over time.
Yes, finishes can shift slowly over time. Copper and other metals naturally react to air and moisture, so gradual color changes are expected. Most pieces are sealed to slow this process, so changes happen over many years in typical indoor conditions.
Heat, humidity and moisture can speed up oxidation and patina. Outdoor display will always result in surface change, since wax and clear coats eventually break down with exposure to sun and weather. For the slowest aging, place the piece indoors in a stable, dry environment. Many collectors appreciate this natural evolution of patina, which adds to the surface variation and long-term character of the metal.
Yes, these metal wall sculptures can often be made in a different size or in copper, bronze, brass, steel or other metals, depending on the design. Use the commission request form to share your preferred size, material and a link to the piece you’re interested in.
Each piece of art is made in Raleigh, North Carolina. Work is designed, built and finished in-house before it ships.
Delivery time depends on prep time and shipping distance. Most orders ship within a few business days, though some may take longer if a custom box or crate is needed for protection. Packages ship via USPS, UPS or FedEx, and transit time varies based on your location relative to Raleigh, North Carolina.
As a general example, UPS Ground from Raleigh to California usually takes 4 to 6 business days in transit, plus prep time before shipment.
Returns are accepted within 14 days of delivery as long as the artwork is in its original condition and returned in the original packaging.
If you don't love your piece once it’s on the wall, it can be returned for a refund. You'll be responsible for paying for return shipping, and the artwork must be packed securely to avoid damage in transit. If the piece arrives damaged due to poor packaging, the refund may be reduced or declined. Once the return is received and inspected, a refund will be issued to your original payment method.
If your artwork arrives damaged, take clear photos of the box, packing materials, and the damage as soon as you open it. Keep all packaging and do not attempt repairs. Then contact us right away with the photos so a replacement, repair or shipping claim can be handled as quickly as possible.
NEED YOUR WALL ART CUSTOM MADE?
Commissioning metal artwork for your wall is a simple process even if you've never done it before. Share the size you have in mind, where it will be displayed and any reference images of styles or designs you like. A quick sketch, photo or simple description is enough to get started.
Existing wall art designs can be adjusted, or a new piece can be designed from scratch in copper, bronze, brass or other metals. A general discussion and ballpark estimate are free.
