Home / Metal Wall Art /
Geologic Abstract Metal Wall Art with Green Patina
$2,495.00
The abstract geologic design of this copper wall sculpture is reminiscent of topographical landscapes, jagged coastlines or mineral formations. Hand hammered from copper sheet into a three-dimensional relief, the 1¼ thick sculpture has the appearance of a solid, elemental slab. The green color is the result of an accelerated natural chemical reaction within the copper, and has been preserved with a protective architectural-quality lacquer.
| Weight | 15 lbs |
|---|---|
| Dimensions | 33 × 15 × 114 in |
| Material | Copper |
PHOTOS & VIDEO
DESCRIPTION & SPECIFICATIONS
ARTWORK DETAILS
| Size | 33 x 15 x 1¼ in |
|---|---|
| Weight | 15 lbs |
| Material | Copper |
| Display | Indoor Only |
DESIGN AND STYLE
This sculpture has an abstract geologic design that is open to viewer interpretation. People see different natural elements within its shape like a lake bed, topographical map, a weathered landscape or a jagged coastline. Others see a raw geode or a natural mineral formation. The open-ended design works in a range of interior styles. The sculpture's modern style fits well with contemporary decor and natural materials like wood and stone. Only one has been made. There are no duplicates or molds for mass-production.
MATERIALS AND CONSTRUCTION
This piece is made from copper sheet metal that has been hammered by hand into a three-dimensional relief. Though it looks like a thick solid slab, the sculpture is a metal shell shaped from a single sheet of copper. Inside the shell is a wood support structure that adds internal stability and provides a secure place to attach the hanging hardware.
The copper was shaped using a variety of hammers, punches and air-powered tools that pushed it into form. The surface depth was driven directly into the metal by thousands of hammer blows, rather than created by adding or removing material. These hammer marks are visible across the sculpture's surface, creating a unique texture that tells the story of its construction. The color contrast between the clean copper surface and the recessed green patina accentuates the 1/4 inch physical depth of the dimensional relief.
This sculpture is for indoor display only, as the wood components are not suitable for exposure to moisture or outdoor conditions.
FINISH AND PATINA
Copper naturally oxidizes and changes color over many years, slowly turning dark brown and eventually green. The green is a the result of a chemical reaction within the copper, which forms colorful copper carbonates and sulfates when exposed to atmospheric elements. This process was accelerated in the studio over several weeks using acids, chemicals, moisture and salts to achieve the vibrant green patina seen here. The sculpture has been sealed with Permalac architectural lacquer to protect the finish.
DIMENSIONS AND HANGING
This sculpture measures 33 inches tall by 15 inches wide, with a depth of 1¼ inches. The piece weighs 15 lbs and hangs flush against the wall, horizontally or vertically, on a french cleat style hanger.Â
STEP BY STEP INSTALLATION
Your artwork ships with a french cleat style wall hanger rated to hold well beyond the sculpture’s weight. The hanger is already attached to the back of the sculpture, and a matching wall bracket is included for installation. Bear Claw screws are provided and work in drywall, plaster, wood and some masonry. Bear Claws do not need to be screwed into a wall stud, they can support the sculpture when screwed into drywall alone. Having said that, if you can hit a stud with 1 one of your screws that's always a good idea. Other screws or anchors can be used if your wall requires them.
TOOLS YOU NEED
- Tape Measure
- Pencil
- Level
- Drill
- 3/16" drill bit
- Phillips screwdriver
NOTES
- No stud required
- Hardware included
- Use larger holes first
- Check level often
- Avoid over-tightening
- Hand tighten only
Mark wall bracket location
Decide where you want the top edge of the artwork to be on the wall. Measure down from that point to the hanger's location; this measurement is provided with your artwork. Mark this spot on the wall with a light pencil line.
Install the next screws
Loosen the center screw slightly so the bracket can swing aside. Drill 3/16 inch pilot holes at the new marks. Swing the bracket back into position and keep the level on top. Insert the next two screws and tighten until they are barely snug, but not fully tight.
Mark the first hole
Hold the bracket so the bottom edge rests on the pencil line and center it where you want the artwork to hang. Mark the center of one of the large holes near the middle of the bracket.
Level and tighten
Tighten the screws one at a time while continuously checking the level. The wall bracket can shift slightly during the final turns of a screw. If the bracket moves out of level, loosen the screws slightly, pivot the bracket back to level, and retighten.
Install the first screw
Drill a 3/16 inch pilot hole at the mark you just made. Drive the first screw in with a handheld screwdriver, but do not tighten it fully. Leave it snug enough to hold the bracket while still allowing it to pivot for leveling.
Test hang the artwork
Hang the artwork once the first three screws are tight to confirm that it sits level. Small adjustments can still be made by loosening the screws and re-leveling the bracket.
Mark the next holes
Place a level on top of the bracket and pivot it until it is level. While holding the bracket level, mark the centers of two additional large holes near each end of the bracket. Using the larger holes allows for easier adjustment in later steps.
Add extra screws
After the bracket is level, additional screws can be installed in the remaining holes for added support. If none of your first three screws are anchored to a wall stud, it is recommended to add at least one more. If you are able to hit a wall stud with one of your screws, then three screws are likely sufficient.
TOOLS YOU MAY NEED
- Tape Measure
- Pencil
- Level
- Drill
- 3/16" drill bit
- Phillips screwdriver
NOTES
- No stud required
- Hardware included
- Use larger holes first
- Check level often
- Avoid over-tightening
- Hand tighten only
Mark wall bracket location
Decide where you want the top edge of the artwork to be on the wall. Measure down from that point to the hanger's location; this measurement is provided with your artwork. Mark this spot on the wall with a light pencil line.
Mark the first hole
Hold the bracket so the bottom edge rests on the pencil line and center it where you want the artwork to hang. Mark the center of one of the large holes near the middle of the bracket.
Install the first screw
Drill a 3/16 inch pilot hole at the mark you just made. Drive the first screw in with a handheld screwdriver, but do not tighten it fully. Leave it snug enough to hold the bracket while still allowing it to pivot for leveling.
Mark the next holes
Place a level on top of the bracket and pivot it until it is level. While holding the bracket level, mark the centers of two additional large holes near each end of the bracket. Using the larger holes allows for easier adjustment in later steps.
Install the next screws
Loosen the center screw slightly so the bracket can swing aside. Drill 3/16 inch pilot holes at the new marks. Swing the bracket back into position and keep the level on top. Insert the next two screws and tighten until they are barely snug, but not fully tight.
Level and tighten
Tighten the screws one at a time while continuously checking the level. The wall bracket can shift slightly during the final turns of a screw. If the bracket moves out of level, loosen the screws slightly, pivot the bracket back to level, and retighten
Test hang the artwork
Hang the artwork once the first three screws are tight to confirm that it sits level. Small adjustments can still be made by loosening the screws and re-leveling the bracket
Add extra screws
After the bracket is level, additional screws can be installed in the remaining holes for added support. If none of your first three screws are anchored to a wall stud, it is recommended to add at least one more. If you are able to hit a wall stud with one of your screws, then three screws are likely sufficient.
PRO-TIPS
Utilize "Wiggle Room": Most brackets have holes larger than the screw diameter. Loosen all mounting screws slightly—just enough so the bracket can move but won’t fall—then pivot it to the level position and retighten while holding it firmly in place.
Compensate for Uneven Walls: If the wall isn't perfectly flat, the bracket may bow or tilt as you tighten the screws. To fix this, loosen the screws slightly and slide a shim—such as a plastic spacer, a metal washer, or even a small piece of cardstock—behind the bracket to fill the gap before retightening.
Widen Existing Holes: If the bracket is stuck because a hole was drilled slightly off, use a round metal file to slightly elongate the mounting hole into an oval shape. This allows for a few millimeters of "post-installation" adjustment.Â
Compensate for Visual Illusions: Sometimes a perfectly level bracket looks "crooked" because the ceiling or a nearby mantel isn't level. In these cases, it is often better to measure an equal distance from the ceiling or mantel on both sides so the artwork appears level to the eye, even if the bubble level says otherwise.
CLEANING AND CARE
OVERVIEW
This wall sculpture requires minimal maintenance. The surface is sealed with Permalac, a professional grade clear lacquer made for metal. The sculpture can be recoated if the finish becomes damaged.
Dust with dry microfiber cloth and avoid abrasive pads or paper towels that can scratch the coating or leave lint. Do not use metal polish, cleaners, or solvents. Handle with clean dry hands or gloves to keep oils off the finish. Keep the piece away from high humidity, direct water contact, and long periods of strong sun.
MAINTENANCE
Dusting
Use a soft, dry microfiber cloth or scratch-free duster to remove dust from the surface.
NOTES
Avoid Humidity
Do not hang in areas with high humidity (bathrooms) or where it may be exposed to water.
Handling
Always handle with clean, dry hands or gloves to prevent oils from affecting the finish.
Display Indoors
Maintain stable indoor temperatures and low humidity levels for long-term preservation.
No Cleaners or Abrasives
Do not use household cleaners, polishes, cleaning sprays or abrasives.
SHIPPING AND RETURNS
FREE U.S. SHIPPING!
Free shipping is available within the United States, including Alaska and Hawaii. Free shipping does not include U.S. territories such as Puerto Rico, the U.S. Virgin Islands, Guam, American Samoa, or the Northern Mariana Islands.Â
Orders ship only to the address entered at checkout. Address changes after purchase are not accepted. If a change is needed, the order must be canceled and placed again with the correct address.
Secure Delivery & Signature Requirement
All orders require an adult signature (21+) upon delivery. A delivery signature serves as proof of delivery and completion of the shipment.
This requirement helps prevent theft, confirms delivery to a person, and provides a record for insurance and delivery verification.
Order Processing & Transit
Most orders ship within 3-5 business days. Some pieces may take longer if a custom box or crate is required to ensure maximum protection during transit.
Orders usually ship via UPS Ground, FedEx Ground, or USPS. Transit time depends on your distance from Raleigh, North Carolina.Â
Orders may be held for verification before shipment. Additional information may be requested to confirm the order.
Expedited Shipping: Contact us before placing your order if you need expedited shipping. Next Day and Two-Day Air service may be available for an added charge.Â
International Shipping: Contact us before ordering for international shipping. Customs rules, duties, tariffs and insurance must be reviewed in advance.Â
RETURN POLICY
If a piece does not work in your space, you may return it for a refund.
Returns are accepted within 14 days of delivery, only if the artwork is returned and received in original condition. Original condition means unused, unaltered, and free of damage, with all original packaging and materials. We do not issue refunds without return of the item.
Contact us before shipping the return so we can provide the correct return address and confirm acceptance.
The buyer is responsible for return shipping. The artwork must be packed securely to prevent damage in transit. If the piece arrives damaged due to poor packaging, the refund may be reduced or declined.
Once the return is received and inspected, refunds are processed within 3 to 7 business days. We will contact you when your return has been received.
If Your Order Arrives Damaged
Please inspect your artwork as soon as it arrives. Take clear photos of the box before opening if there is visible damage.
Take pictures of the packing materials and any damage to the artwork. Damage must be reported within 48 hours of delivery.
Keep all packaging and do not attempt repairs. Contact us right away with the photos so a repair, replacement, refund or shipping claim can be arranged.
Customer Support
If there is any issue with your order, contact us so we can resolve it. We answer customer service requests within 1-2 business days and are happy to help.
FREE U.S. SHIPPING!
Free shipping is available within the United States, including Alaska and Hawaii. Free shipping does not include U.S. territories such as Puerto Rico, the U.S. Virgin Islands, Guam, American Samoa, or the Northern Mariana Islands. Contact us before ordering if you are located in one of these areas. An added shipping charge will apply.
Most orders ship within a few business days. Some pieces may take longer if a custom box or crate is required.
Orders usually ship by UPS Ground, FedEx Ground, or USPS. Transit time depends on your distance from Raleigh, North Carolina. As an example, UPS Ground to California often takes about 4 to 6 business days in transit, plus order prep time before shipment.
Expedited Shipping: Contact us before placing your order if you need expedited shipping. Next Day and Two-Day Air service are available for an added charge. Expedited shipping often ranges from about $200 to $500 depending on size, weight, and destination.
International Shipping: Contact us before ordering for international shipping. Customs rules, duties, tariffs and insurance must be reviewed in advance. An added shipping charge will apply. Shipping costs can be high, and some destinations have limits or added fees for art.
If Your Order Arrives Damaged: Please inspect your artwork as soon as it arrives. Take clear photos of the box before opening if there is visible damage. Take pictures of the packing materials and any damage to the artwork. Keep all packaging and do not attempt repairs. Contact us right away with the photos so a repair, replacement, or shipping claim can be arranged.
RETURN POLICY
Returns are accepted within 14 days of delivery if the artwork is in original condition and packed in the original materials.
If a piece does not work in your space, you may return it for a refund. Contact us before shipping the return so we can provide the correct return address and expect the package.
The buyer is responsible for return shipping. The artwork must be packed securely to prevent damage in transit. If the piece arrives damaged due to poor packaging, the refund may be reduced or declined.
Once the return is received and inspected, we will contact you and issue a refund if the artwork is still in original condition.
Want this artwork in a different size or material?
If you like this piece but need a different size or metal, that can usually be done. Many commissions start with an existing design and are adjusted to fit a specific wall, room or project. Typically, these designs can be made in copper, bronze, brass or aluminum. Steel or stainless steel can sometimes be used as well, though it depends on the design and may require a simpler approach.
Share a few details in the form about what you are looking for. You'll be contacted by email to talk through the idea, answer questions and provide a quote with an estimated build and delivery time.
Want to commission a custom piece of art?
Custom metalwork built to order. Projects range from original artwork to purpose-built functional pieces, designed around your space, materials and specifications. We can help with everything from early concept to final fabrication.Â
Are You a Designer, Gallery or Wholesaler?
Trade pricing may be available for interior designers, builders, galleries and wholesale partners. Discounts depend on order size, project scope, and whether work is custom or in stock. Reach out with a description of what you need and your timeline.